HTLS10K
Call for Pricing
Price
Make:
Belltec
Model:
HTLS10K
Category:
Belltec, Hydraulic Auger Drives, New, Products
15-30 GPM 10,000 ft/lbs
| MODEL HTLS10K | ORDER NUMBER 113077 |
| Motor Type: | gerotor |
| Motor Max Continuous Pressure: | 3,000 psi |
| Motor Max Intermittent Pressure: | 4,000 psi |
| Motor Max Peak Pressure: | 4,350 psi |
| Motor Flow Range: | 15-30 gpm |
| Output Shaft: | 2-1/2″ hex |
| Case Drain Not Required |
| PSI | TORQUE (FT-LB) Theory |
TORQUE (FT-LB) Actual |
GPM | Drive Ouput RPM |
| 2,000 | 6,984 | 6,197 | 15 | 13 |
| 2,500 | 8,730 | 7,787 | 18 | 16 |
| 3,000 | 10,476 | 9,364 | 22 | 19 |
| 3,450 | 12,048 | 10,764 | 26 | 23 |
| 28 | 25 | |||
| 30 | 26 |
Similar Products
M350, H350
Call for Pricing
20-35 GPM 3500 ft/lb
MODEL M-350
ORDER NUMBER 113030
Maximum Outp...
NC200, M200, H200
Call for Pricing
10-20 GPM 2000 ft/lb
MODEL NC-200
ORDER NUMBER 113026
Maximum Out...
NC300, M300, H300
Call for Pricing
15-30 GPM 3000 ft/lb
MODEL NC-300
ORDER NUMBER 113027
Maximum Out...
Clean Out Buckets (Foundation/Pressure Auger)
Call for Pricing
AUTOMATIC OPEN/CLOSE
For use in cleaning material from the hole that ...
Core Barrel
Call for Pricing
BULLET TEETH
For use in hard rock that cannot be augured economically....
Core Barrel (Foundation/Pressure Auger)
Call for Pricing
BULLET TEETH
For use in hard rock that cannot be augered economically...
